Eliminate Line Chafing | How To Fish

No-Wear guards are designed and manufactured in the United States

eliminate line chafing

eliminate line chafing

Chafing and rubbing from mooring lines can ruin the appearance of your boat and cost a fortune to fix. No-Wear Chafe Guard stops all chafing damage on every kind of boat. No-Wear guards are the first in the world to combine flexible, marine-grade stainless steel with aircraft-quality adhesive to create a product that looks great and will protect your gelcoat or teak for years to come.

No-Wear guards are designed and manufactured in the United States from polished 316 marine-grade stainless steel backed with a very thin layer of high-performance aeronautic adhesive that forms a permanent bond with any nonporous surface. The adhesive remains stable in temperatures from -40 degrees F to 250 degrees F (-4 degrees C to 122 degrees C) so it won’t come off, even in the most extreme boating conditions.

No-Wear Chafe Guard is ultrathin and very flexible. At only 0.05 mm (or 0.002 inch), it’s half as thick as the average human hair and will conform to almost any surface or contour on your boat, leaving a super-smooth, super-tough surface that can’t be damaged by rubbing ropes.

Standard-size No-Wear guards are 2 inches wide and available in 6- and 9-inch lengths. With a good pair of scissors, No-Wear guards can also be cut to shape for awkward locations and can even be made to custom sizes by special request. Check them out at www.nowearguard.com.
Dave Ferrell
Orlando, Florida**_