Advertisement

Slane Marine – 62 Convertible

Follow the build of the 62-foot convertible from Slane Marine.

June 11, 2015
slane6228.jpg
The Slane 62 includes all the essentials you would expect of Carolina styling. The high, well-raked bow meets the sweeping sheer that breaks at the aft end of the house, and the fully-functional flying bridge offers perfect sightlines. The cockpit is one of the largest in its class and features a removable mezzanine. The Slane 62 also boasts 30-percent larger accommodations that include four spacious staterooms and three heads, along with a salon and galley offered in a choice of layouts and finished to the owner’s specifications. “The 62 will be one of the most fuel-efficient sportfishing boats in its class ever built,” said Tom Slane, founder and president of Slane Marine. “The twin Volvo Penta D-13 diesels and IPS3 pod drives, when mated with the 62’s optimized Carolina hull form, will result in fuel savings of up to 52 percent, compared with a traditional inboard.”
slane6201.jpg

Specs:

LOA: 62′ Beam: 18′ 2″ Draft: 4′ 5″ Weight: 57,500 lbs wet (estimated) Propulsion: Volvo Penta IPS 3 Fuel: 1,000 gallons Water: 250 gallons Holding: 150 gallons Staterooms: 4 Heads: 3 Cockpit: 185 sq ft Top Speed: 38 kts Cruise: 34 kts Fuel Burn @ 30 kts: 59 gph Range @ 30 kts: 585 miles
slane6202.jpg
slane6203.jpg
slane6204.jpg
slane6205.jpg
slane6206.jpg
slane6207.jpg
slane6208.jpg
slane6209.jpg
slane6210.jpg
slane6211.jpg
slane6212.jpg
slane6213.jpg
slane6214.jpg
slane6215.jpg
slane6216.jpg
slane6217.jpg
slane6218.jpg
slane6219.jpg
slane6220.jpg
slane6221.jpg
slane6222.jpg
slane6223.jpg
slane6224.jpg
slane6225.jpg
slane6226.jpg
slane6227.jpg
slane0301.jpg
slane0302.jpg
slane0303.jpg
slane0304.jpg
slane0318_01.jpg
Mezzanine mold sprayed with gelcoat
slane0318_03.jpg
Preparing the coming mold
slane0318_02.jpg
Final engine room paint prep
slane0318_04.jpg
Mezzanine lamination
slane032001.jpg
Interior bulkheads and walls ready to install
slane032002.jpg
Interior bulkheads and walls ready to install
slane032003.jpg
Mezzanine out of the mold
slane032004.jpg
Coaming mold lamination
slane040901.jpg
Mezzanine test fit
slane040902.jpg
Lower accommodations sole installed
slane040903.jpg
Transom fish box mold progress
slane040904.jpg
Coaming mold progress
slane0413_web.jpg
Installing interior bulkheads
slane55.jpg
Finishing lamination on the coaming mold
slane56.jpg
Interior bulkhead installation progress
slane_0515001.jpg
Coaming removal from the mold
slane_0515002.jpg
Lower accommodations bulkheads installed
slane_0515003.jpg
Port guest stateroom furniture test fit
slane_0515004.jpg
Master stateroom furniture test fit
slane_0515005.jpg
Master stateroom furniture test fit
slane_0515006.jpg
Shower stalls complete
slane_61001.jpg
Engine room painted with port engine set in place
slane_61002.jpg
Starboard engine installation
slane_61003.jpg
Starboard engine installation
slane_61004.jpg
Overview of lower accommodations
slane_61005.jpg
Master stateroom overview
slane_61006.jpg
Overview of aft guest staterooms
slane_610_001.jpg
Setting the superstructure on the hull
slane_610_002.jpg
Setting the superstructure on the hull
slane_610_003.jpg
Superstructure set on hull
slane_610_004.jpg
Flybridge test fit on superstructure
slane_610_005.jpg
Profile view
slane_610_006.jpg
Overview of the cockpit
Advertisement

More Photos

Advertisement